The finish of the rails may be important from an aesthetic point of view and also for the grip surface it provides. weigh more than the maximum user weight (between 100kg and 150kg depending on the type of bed lever you use). They are fixed to the wall or to the floor behind the toilet and can fold down to a horizontal position alongside the toilet. Next consider your ability to grip onto a grab rail. Do you have reasonable hand strength? Do you ever have pain in your hands, wrists, elbows or shoulders which would prevent you from pulling up or pushing down on a grab rail? What is your overall balance and ability to stand like? These fix to the wall behind the taps and rest on the bath rims. When sitting in the bath, the rail will be directly in front of the person at about chest height. In this position it will provide stability whilst in the bath. The rail should only have downward pressure applied so the weight is taken by the bath rim, it is not designed for the user to pull on to sit down or stand up from the base of the bath (Pain et al 2003).

Toilet frames are designed to provide horizontal support for pushing up from a toilet, or for steadying the body when lowering onto a toilet. The frame, which stands over the top of the toilet, can either be free standing or fixed to the floor. Make sure that when the bed lever is in place and you're in bed you can still reach things like your bedside light and phone. How to use a bed lever Sitting down When standing from a sitting position in the bath you may find it helpful to hold one horizontal wall-fixed grab rail (placed above the bath) with one hand and use the outer rim of the bath with the other hand to push against. There needs to be a 50-60mm clearance between the wall and all handrails. It does not include a frail elderly person who is otherwise able-bodied or any person who is only temporarily disabled or incapacitated, such as with a broken limb.‘personal or domestic’ use means that the supply must be made available specifically for the use of an eligible individual. Part of the rail can be fixed at an angle of 13° upwards towards the head end of the bath to provide an inclined support.The bed lever is not for a restless sleeper, or someone with erratic, repetitive or violent movements. Straight rails are wall-fixed rails which run in one direction only. They can be fixed in a horizontal or a vertical position, or at an incline or angle. Our Bed Lever is a safe and stable handhold to help the elderly, disabled, or anyone with physical limitations or injury to get in and out of bed with less effort.

Cranked or offset rails are wall-fixed rails which have been designed to fit to frames and spaces to allow the user to step up to and through a doorway or space without releasing grip on the rail. The EasyFit Plus Bedrail provides a stable support when getting into and out of bed, and can also be used to assist with re-positioning whilst in bed. The ergonomic handle offers multiple grip options enabling you to find the most comfortable position. Two handrail heights are available, making it suitable for use on low and tall beds. While sitting on the bed, hold the bed lever to provide support as you swing your legs onto the bed. Getting out of bed

Rails set at an angle can help a person who needs a steadying support - e.g. to stand from a bath board to shower. The rail can be placed at an angle of 45 degrees up and away from the user. This keeps the wrist in a neutral position. It is not necessary to lean far forward to grasp the rail at the lower end and the hand can travel up the rail to maintain the support once the person is standing.

Independent Living Charitable Trust cannot be liable for any harm or injury that may result from the improper use, suitability, incorrect installation, or neglect to follow through with ongoing safety assessments as the user’s situation changes. Multifit Bed Levers are known by many as one of New Zealand’s most trusted and reliable bedroom aids. Vertical rails may assist when pulling up into a standing position or for just maintaining balance. Hold on to the bed lever as you sit yourself up, then swing your legs over the side of the bed to reach the floor. Standing up Consider your daily routine. What movements are you making or what activities are you doing when you feel that additional support, or something to hold on to, would give you extra safety? For example:Almost uniquely in this area, the 2-in-1 Bed Rail's reversible plastic base makes it suitable for use on both divan-style and slatted base beds. The 2-in-1 bed grab rail has a slimmer, yet stronger base, making it ideal for an even wider number of users while at the same time minimizing the intrusive impact of the base under the mattress. The slightly angled shape of the ergonomic handle helps users to easily and comfortably use the grab rail to move from a lying position to sitting and from a sitting position to standing. The handle itself can be easily removed from the base by removing the two e-clips, allowing it to be positioned as required or allowing full unrestricted access to the user for nursing or other requirements. This bed safety rail is supplied with two easy-to-fit straps to hold it securely in place. We are delighted to tell you that the NRS Healthcare EasyFit Plus+ Bed Rail has been tried and tested by our team of Occupational Therapists who are proud to give it the OT Recommended seal of approval.