AllPondSolutions CUP-129-1000L/H All in One Pond Pump Filter with Fountain and 9w UV Steriliser

Product Information

Length of pond (m) x Width of pond (m) x Depth of pond x 1000 Understanding Flow Rate With Pressurised Filters The AllPondSolutions All-in-One CUP-305 system combines everything required to run a healthy algae-free small sized pond. Designed as a single smart unit with a single power cable it allows for a much easier installation compared to a standard pond set up. Bacteria requires oxygen, so water needs to be constantly running through the filter to keep these good bacteria alive. Fountains help aerate the water and keep it moving. They also have the added benefit of looking great and adding a relaxing sound to the garden. The PondXpert All in One Triple Action 3000 Pond Pump/Filter/UV Steriliser is designed for small ponds of 3,000L and under in volume. This size applies only to ornamental ponds but the flow rate of 1,000L/hr also supports fish ponds of up to 1,500L and this model is energy efficient, needing only 28W of power to operate well.

This submersible pond pump can be used as both a filter and a watercourse pump; it’s suitable for ponds up to 5000 L in size, with a flow rate of 10,000 L per hour. Be aware, however, that this pump needs to be hooked up to a separate filtration unit to be most effective. Although it’s a very powerful pump, moving a lot of water, it is not intended to filter the water by itself. The outer case will only act as a minimal filter, for debris over approximately 6 mm. Finally, this filter pump is equipped with a thermal resettable fuse so it automatically switches itself off if the motor overheats. Therefore, the pump can be left on continuously. Submersible pond pumps are exactly what they sound like – they’re placed below the surface of the pond and are generally camouflaged in the pond itself. For most domestic ponds, submersible pond pumps are the easiest pump system to set up and use.

Shopping Basket

Unlike some pond pumps which have short mains cables, this pump has a 10 m cable so it’s suitable for larger gardens. It’s relatively easy to set up and maintain, and the flow is fully adjustable for the filter, waterfall and water features. Larger particles need to be removed from the water first before other filters can get to work on a deeper level. As a result, mechanical filter media requires the most maintenance – these are the filters that often get clogged up with dirt.

Chemical media is not found in all filters. It is often chosen to do a specific job, which you may or may not deem necessary in your pond.

Help Me

Adjustable flow to fountain that comes with three different heads – one stage; two stages; bell shape. I love multi-function appliances and the All Pond Solutions Pond Pump Filter with Fountain has all three that you need to keep your pond (and fish) clean and in good condition. The pump circulates 1,000L/hr of water, the filters use both mechanical and biological means to strain out the debris and the UV light keeps the green algae from appearing. Plus you have the adjustable angle and flow fountain, with a splitter for a waterfall if that’s more your landscape design aesthetic.

If you have a Koi pond then you need a pump which will circulate 100% of the pond water every hour. A 9000 L Koi pond would require a pump with a minimum flow rate of 9000 L per hour. One thing that might be a little misleading, is the amount of water this submersible pump can filter – despite the model name being ‘3000’, it is only suitable for filtering 700 L of water an hour. Therefore, it’s only appropriate for small-medium ponds. This is worth being aware of – due to its name it could easily be mistaken as more powerful than other pond pumps. Carbon is the most frequently used of the chemical media, and should be used in conjunction with mechanical and biological media. It’s what boosts clear filtered water to the next level: crystal clear sparkling water. If you are buying a pump and pressurised filter system separately, there are a few things you need to know to make sure that they are compatible. If you buy the pump and filter as a set, this should already have been taken care of for you, but it’s good to be aware of. It can sometimes be daunting to know which Filtration system fits Your Pond, You just need to choose one to fit the size of your Pond.

However, the UV-C light gets rid of all microorganisms, both bad and good. If your pond doesn’t receive a great amount of direct sunlight and you don’t have an algae problem, you may prefer a pond pump with a filter that comes without this feature. Fountain It’s a single unit with just one power cable (10 metres long) which makes a change from other pond pumps that can have multiple wires, units, and connectors. It also has filter medium included, so there’s no need to buy a filter separately to the pump. The flow rate is 2000 L per hour. Pond pumps can get expensive to run, so it can help to calculate how much it’s likely to cost. Remember, if you have fish in your pond, you ideally want the pump to be running the whole time.

This submersible pump works by drawing water through the cage grill which filters out coarse solids. Smaller particles are eliminated using the clip-in mesh filter tray. This filtration system helps stop the pump from getting clogged, allowing it to work continuously. The included filtration media includes large coarse and fine filter foams that water must pass through first and also one large filter media compartment, filled with ceramic biological filter media. Alternatively, you could change the included media inside for an alternative pond filter media of your choice. Plus, for those who are after an eye-catching water feature, this pump also comes with five different fountain heads, creating five different types of fountain. The fountain styles are named ‘Daisy’, ‘Triple’, ‘Foam’, ‘Bell’ or ‘Tulip’ and you can see examples of the fountains that they produce in the product listing.

Pallet delivery is to the kerbside (at least 2 people will be needed to off-load depending on item size.) As it turns out, there’s a lot more to pond filtration systems than simply cleaning grubby water. This Blagdon Inpond 5-in-1 3000 offers five different functions in one unit, these range from filters to fountains. It has a maximum flow rate of 700 L per hour. Given the power of this pump, it’s suitable for use as a waterfall pump because it can push the water relatively high. It would cost you less than 4p a day to run the pump for 24 hours. Additional Features – Are They Worth Having? Fountains