AVM FRITZ!Repeater 3000 - Repeater - WLAN

Product Information

I just don't understand the inconsistencies. According to Philippe_d, there is now only one firmware version for Fritz products now. /thread/9pl56k49?p=121#r2417 I’ve tried this in two locations: inside my house in a bedroom and in an outside cabin and the results were impressive in both locations. Location Have a bit of a think about it for a moment...............If the 3000 WiFi is disabled, how would it detect the 7490 WiFi is enabled?

If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is integrated into the Mesh and marked in the FRITZ!Box user interface with the Mesh symbol . The FRITZ!Repeater then adopts all of the settings from the FRITZ!Box, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception. I retried over 5 times going through the same reset procedure culminating in a reboot loop. At this stage I thought it may have died but decided to leave it off for half an hour and try again. I have just change the repeater to which the 5 gig connects and now I can see all devices on the 5 gig band (and 1 external 5 gig) – I could not see that last night.

Once set up you’ll need to find a good position, you want to place this where the existing WiFi signal is OK rather than non-existent. The repeater takes your existing signal and boosts it so it is stronger and can reach further.

Yesterday I decided to bite the bullet and bought a Fritz Repeater 3000 from PLE, the last one in Perth. AVM continue their expansion into the UK with a companion product to their brilliant FRITZ!Box routers that can also be used with any router on the market. The FRITZ!Repeater 3000 is a wireless LAN repeater (wLAN) that can be used to boost your home WiFi signal and eliminate any weak signal issues you’re experiencing.In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box at the touch of a button (WPS - Push Button Configuration). Improved** When the repeater is integrated into the Mesh by first pressing the button on the FRITZ!Box and then the button on the repeater, successful integration is signaled by the LED on the repeater flashing briefly